Filter
Top Products
Netware 4.x, 5- Advanced Settings
NetWare Configuration 4 - 15
•
Clicking [Browse], you can select a file server among those listed in the Browse
dialog.
•
In the [NDS Context] box, enter the context in which the print server is to be
created.
•
Clicking [Browse], you can select a context among those listed in the Browse
dialog.
•
Object names must be entered from a lower level and divided by a period. For
example, if you want to create a file server into NETWORK under DS, enter
“NETWORK. DS”.
•
In the [Print Server Operation Mode] group, click [As Remote Printer].
•
In the [Remote Printer No.] box, enter the number of the printer.
•
Use the same number as that of the printer to be created in the print server.
•
Click [OK] to close the property sheet.
•
After a confirmation dialog appears, click [OK].
9
In the [NIC] menu, click [Exit] to exit the NIC Setup Tool.
10
From Windows, run NWAdmin.
•
The actual NWAdmin programs differ depending on the version of it and that of
the operating system. Run the NWADMIN.EXE except the following cases.
When you are using the NetWare 4.11 or higher on Windows 3.1x, run the
NWADMN3X.EXE. When you are using the IntranetWare on Windows95/98,
run the NWADMN95.EXE. When you are using the Net-Ware 5, run the
NWADMN32.EXE.
•
The NWAdmin programs are located in the PUBLIC directory in the SYS
volume. The NWADMN95.EXE is located in the PUBLIC\WIN95 directory.
The NWADMN32.EXE is located in the PUBLIC\WIN32 directory.
11
Create a print queue as follows.
•
Select the container object the print queue is located in among those in the
directory tree, and click [Create] in the [Object] menu.
•
In the [Class of new object] box, click “Print Queue” to highlight it, and click
[OK].
•
In the [Print Queue name] box, enter the name of the print queue.
•
In the [Print Queue Volume] box, click Browse button.
•
In the [Available objects] box, click the volume in which the print queue is
created to highlight it, and click [OK].
•
After confirming the settings, click [Create].
12
Create a printer as follows.
•
Select the container object the printer is located in, and click [Create] in the
[Object] menu.
•
In the [Class of new object] box, click “Printer” to highlight it, and click [OK].