Filter
Top Products
2-1
2: Command Reference
This chapter describes all commands that can be used with the MSS. The commands are listed in
alphabetical order, excluding the Ports and Server parameters, which apply only to the MSS4. For example,
Change Server Bootgateway
is considered the same command as
Change Bootgateway
and is
alphabetized according to the latter.
Commands that configure the MSS serial ports will not affect a dedicated console port unless explicitly
stated in the individual command description.,
Some commands can be used with environment strings, which are discussed in detail in
Appendix B
.
The following items are provided in the description of each command.
◆
The command’s full syntax, shown in diagram form. See
Command Syntax
on page 1-1 for more
information on the command syntax.
◆
Any restrictions on the command, such as whether you must be the privileged user to use it
◆
Potential errors that may be encountered when using the command
◆
Default settings, where applicable
◆
Examples of the command, where applicable
◆
Cross-references to related commands