Filter
Top Products
Command Reference Change 80211
2-6
Restrictions Requires privileged user status.
Only applies to the MSS-VIA and certain MSS4 models.
Errors If you enter a command that is not applicable to the 802.11 card currently in
use, you will receive an Error message.
Parameters
Card
Instructs the MSS to use the MAC address of the wireless PC card that is
inserted into one of its PC card slots.
MSS
Instructs the MSS to use its own internal MAC address.
Defaults MSS
Examples
Local>> CHANGE 80211 MACADDRESS CARD
Local>> CHANGE 80211 RESET
See Also Show 80211, page 2-63
2.2.7 Change 80211 Network Mode
Denotes whether the MSS operates in a peer-to-peer (AdHoc) or managed (Infrastructure) network
environment.
Any configuration changes you make will not take place until you issue the Change 80211 Reset command.
Restrictions Requires privileged user status.
Only applies to the MSS-VIA and certain MSS4 models.
Errors If you enter a command that is not applicable to the 802.11 card currently in
use, you will receive an Error message.
Parameters
AdHoc
Specifies that the MSS is communicating with other wireless devices in a peer-
to-peer capacity.
Infrastructure
Specifies that the MSS is communicating with an Access Point (AP).
Defaults Infrastructure
Examples
Local>> CHANGE 80211 NETWORKMODE ADHOC
Local>> CHANGE 80211 RESET
See Also Show 80211, page 2-63
CHANGE 80211 NETWORKMODE
ADHOC
INFRASTRUCTURE