Filter
Top Products
Command Reference Change Nameserver
2-33
Errors The server name must be unique to the network.
Parameters
Server
MSS4 only.
serverName
Enter a string of up to 16 characters. Strings must be enclosed in quotes if they
contain lower-case letters, spaces, or punctuation.
See Also Change WINS, page 2-51.
2.35 Change Nameserver
Specifies the nameserver to be used during TCP/IP connections. The nameserver will attempt to resolve text
host names into numeric IP address form.
Restrictions Requires privileged user status.
Parameters
Server
MSS4 only.
Secondary
Specifies a nameserver to be used when the primary nameserver is unavailable.
IPaddress
Specify a host using standard numeric format. Do not enter a text host name.
2.36 Change NetWare Encapsulation
Configures the frame types that the MSS will pay attention to during IPX connections. When NetWare
routing is enabled with the Change NetWare Routing command, all frame types are enabled regardless of
the settings made with this command.
Restrictions Requires privileged user status.
The MSSLite, MSS4, and the MSS-VIA do not support Netware.
Errors When enabling more than one frame type, you must enable NetWare Routing.
CHANGE
SERVER
SECONDARY
NAMESERVER IPaddress
CHANGE NETWARE ENCAPSULATION
ETHER_II
NATIVE
SNAP
802_2
DISABLED
ENABLED