Filter
Top Products
Command Reference Show Services
2-66
Parameters
Bootparams
Displays MSS parameters that relate to the boot procedure and software
loadfile.
Counters
Displays Ethernet and TCP/IP error information.
Characteristics
Displays server settings including hardware address, timer limit, password
limit, session limit, retransmit limit, IP address, subnet mask, nameserver,
gateway, and more.
Defaults Characteristics
See Also Status Displays, page 5-6.
2.94 Show Services
Displays the characteristics of the LAT services on the network.
Restrictions This list is masked by the service groups that the port is able to see. In other
words, users will not be able to see services to which they cannot connect.
Errors Does not apply to MSSLite, MSS-VIA, or the MSS4.
Parameters
serviceName
Specify a service whose information you want to see. Wildcards are permitted.
All services will be shown if no service is specified.
See Also Status Displays, page 5-6.
2.95 Show Session
Displays information about the serial port’s current session(s). For the MSS4, this command shows the
current session(s) for the current serial port.
See Also Status Displays, page 5-6.
SHOW SERVICES serviceName[]
SHOW SESSION