Filter
Top Products
Command Reference Change 80211
2-8
Parameters
Regions
IC: Canada
ETSI: Europe, most countries (verify with your local regulatory body)
SPAIN: Spain
FRANCE: France
MKK: Japan
Defaults FCC
Examples
Local>> CHANGE 80211 REGION FRANCE
Local>> CHANGE 80211 RESET
See Also Show 80211, page 2-63
2.2.10 Change 80211 Reset
Resets the MSS so any configuration changes will take effect immediately.
Restrictions Requires privileged user status.
Only applies to the MSS-VIA and certain MSS4 models.
Parameters
Reset
Resets the MSS to make all 802.11 changes take effect immediately. This
command should be entered anytime you make an 802.11 configuration
change. It also clears out any previous errors and starts over with the current
802.11 parameters.
See Also Show 80211, page 2-63
2.2.11 Change 80211 RTS
Changes the RTS threshold value.
Any configuration changes you make will not take place until you issue the Change 80211 Reset command.
Restrictions Requires privileged user status.
Only applies to the MSS-VIA and certain MSS4 models.
Errors If you enter a command that is not applicable to the 802.11 card currently in
use, you will receive an Error message.
CHANGE 80211 RESET
CHANGE 80211 RTS num