Filter
Top Products
Command Reference Show SNMP
2-67
2.96 Show SNMP
Displays configured SNMP communities and their access modes (read-only or read/write). The default
community name is public, and allows read-only access. There is one additional user-configurable SNMP
community.
See Also Status Displays, page 5-6; Change SNMPSetComm, page 2-44.
2.97 Show Users
Displays the current users logged into the MSS, their port usernames, and current connection information.
See Also The Status Displays
section in your MSS Installation Guide.
2.98 Show Version
Displays operating software version information.
Errors Applies to the MSS4 only.
See Also Change Software, page 2-45
2.99 Source
Downloads a configuration file from a TFTP host. The file is assumed to contain lines of server commands
to be executed. The Source command is most useful for trying out a configuration file before using the
Change Software command.
Errors Only applies to the MSS-VIA and MSS4.
Parameters
hostname:filename
Enter the TFTP hostname (either a text name or an IP address) followed by a
colon and the download path and file name.
SHOW SNMP
SHOW USERS
SHOW VERSION
SOURCE hostname:filename