Filter
Top Products
3. Lower and position the computer cover into place and then tighten the two screws 1 to secure the
computer cover.
Figure 50. Installing the computer cover
4. Reinstall the frame stand. See “Removing and reinstalling the frame stand” on page 71.
5. Lock the computer cover if you have an integrated cable lock.
6. Reconnect the external cables and power cord to the computer.
7. Depending on the parts you installed or replaced, you might need to conrm the updated information in
the Setup Utility program. Refer to Chapter 6 “Using the Setup Utility program” on page 55.
Note: In most areas of the world, Lenovo requires the return of the defective Customer Replaceable Unit
(CRU). Information about this will come with the CRU or will come a few days after the CRU arrives.
Chapter 9. Replacing FRUs 109