Filter
Top Products
5. Remove the hard-disk-drive EMI shield. See “Removing and installing the hard-disk-drive EMI shield”
on page 76.
6. Remove the screw 1 , and then pivot the hard-disk-drive bracket with the hard disk drive as shown to
remove it from the chassis.
Figure 14. Removing the hard-disk-drive bracket with the hard disk drive
7. Disconnect the cable from the hard disk drive.
8. Remove the four screws that secure the hard disk drive to the bracket, and then remove the hard disk
drive from the bracket. Do not touch the circuit board on the bottom of the hard disk drive.
Figure 15. Removing the hard disk drive from the bracket
9. To install the new hard disk drive, position the new hard disk drive in the hard-disk-drive bracket so
that the four screw holes in the hard disk drive align with the corresponding holes in the bracket. Then,
install the four screws to secure the hard disk drive to the bracket.
Chapter 9. Replacing FRUs 79