Filter
Top Products
The following table shows which functions of the audio devices attached to the jacks on your computer or
docking station are supported.
Table 6. Audio feature list
Headset with a 3.5 mm
4-pole plug
Conventional headphone Conventional microphone
Combo audio jack
Headphone and
microphone functions
supported
Headphone function
supported
Not supported
Headphone jack of the
docking station
Only headphone function
supported
Microphone function not
supported
Headphone function
supported
Not supported
Microphone jack of the
docking station
Not supported Not supported
Microphone function
supported
Beam Forming feature
A built-in dual array digital microphone is mounted at the top of the display. Whereas a conventional
single-element microphone captures sounds from all around, the built-in dual array digital microphone is
designed to capture the sound from an exceptionally limited angle, through the combination of a specialized
microphone array with a capability of digital signal processing. Therefore the microphone captures sounds
from the area in front of the system clearly, but blocks out almost all the sounds from outside the capturing
range. Thus the speech of a user sitting in front of the system is input to the system without interference
from noise in the surrounding area. To record your speech most clearly, you should speak from directly in
front of the computer.
Conguring for sound recording
To congure the microphone for optimized sound recording, open the SmartAudio window as follows:
For Windows 7 and Windows Vista: Click Start ➙ Control Panel ➙ Hardware and Sound ➙ SmartAudio.
The SmartAudio window opens.
For Windows XP: Click Start ➙ Control Panel. Switch to Classic View and click SmartAudio. The
SmartAudio window opens.
Using an integrated camera
If your computer has an integrated camera, when you press Fn+F6 to open the Communications settings
window, the camera will be launched and the green camera-in-use indicator will turn on automatically. In
the Communications settings window, you can preview your video image and take a snapshot of your
current image.
You can also use the integrated camera with other programs that provide features such as photographing,
video capturing, and video conferencing. To use the integrated camera with other programs, open one of the
programs and start the photographing, video capturing, or video conferencing function. Then, the camera
will start automatically and the green camera-in-use indicator will turn on. For more information about using
the camera with a program, refer to the documentation that came with the program.
If you do not want the camera to be launched automatically when you press Fn+F6 or when you use a
program, press Fn+F6 to open the Communications settings window and click the Hide my camera image
button to disable the camera.
86 User Guide