Filter
Top Products
Table 8. Cong menu items (continued)
Menu item
Submenu item Selection Comments
If you select “0”, use 60
seconds as default timeout
value.
If you select “255”, waiting
time for establishing a
connection is unlimited.
Console Type • PC-ANSI
• VT100+
• VT-UTF8
Select the console type for
AMT.
Note: This console type
should match the Intel AMT
remote console.
Security menu items
Table 9. Security menu items
Menu item
Submenu item Selection Comments
Password
Refer to “Security menu”
on page 203
and “Using
passwords” on page 97.
Predesktop Authentication • Disabled
• Enabled
Enable or disable ngerprint
authentication before the
operating system is loaded.
Reader Priority • External ➙ Internal
• Internal Only
If External ➙ Internal
is selected, an external
ngerprint reader is used
if attached. Otherwise, an
internal ngerprint reader
is used. If Internal Only
is selected, an internal
ngerprint reader is used.
Security Mode
• Normal
• High
If ngerprint authentication
fails, you can still start
the computer by entering
a password. If you have
selected “Normal”, enter a
power-on password or a
supervisor password; if you
have selected “High”, enter
a supervisor password.
Password Authentication • Disabled
• Enabled
Enable or disable password
authentication. If high
security mode is selected,
this item appears.
Fingerprint
Reset Fingerprint Data • Enter This option is used to erase
all ngerprint data stored
in the ngerprint reader
and reset settings to the
factory state (ex. Power-on
security, LEDs, etc.) As
a result, any power-on
security features previously
212 User Guide