Filter
Top Products
Remove packaging material, [area name]
Remove any remaining packaging material from the specified location.
Remove paper from standard output bin
Remove the stack of paper from the standard exit bin.
Replace all originals if restarting job.
Try one or more of the following:
• Touch Cancel job to clear the message and cancel the scan job.
• Touch Scan from automatic feeder to continue scanning from the ADF immediately after the last successful scan
job.
• Touch Scan from flatbed to continue scanning from the scanner immediately after the last successful scan job.
• Touch Finish job without further scanning to end the last successful scan job.
• Touch Restart job to restart the scan job with the same settings from the previous scan job.
Remove originals from the scanner automatic document feeder
The scanner failed to feed one or more pages through the Automatic Document Feeder (ADF).
1 Remove all pages from the ADF.
Note: The message clears when the pages are removed from the ADF.
2 Flex the pages.
3 Place the pages in the ADF.
4 Adjust the ADF guides.
Restore held jobs?
Try one or more of the following:
• Touch Restore to restore all held jobs stored on the printer hard disk.
• Touch Do not restore if you do not want any print jobs to be restored.
Scanner automatic feeder cover open
Close the ADF cover to clear the message.
Scan document too long
The scan job exceeds the maximum number of pages. Touch Cancel job to clear the message and cancel the scan job.
Troubleshooting 244