Lexmark 26G0100 Printer User Manual


 
print quality troubleshooting
blank pages 267
characters have jagged edges 267
clipped images 268
dark lines 268
gray background 268
light colored line, white line, or
incorrectly colored line 269
poor transparency quality 276
print irregularities 270
print is too dark 273
print is too light 272
repeating defects 271
skewed print 271
solid color or black pages appear
on prints 274
toner fog or background
shading 274
toner rubs off 275
toner specks 275
uneven print density 276
print troubleshooting
error reading flash drive 251
held jobs do not print 252
incorrect margins 269
incorrect or strange characters
print 253
jammed pages are not
reprinted 266
job prints from wrong tray 253
job prints on wrong paper 253
jobs do not print 251
Large jobs do not collate 254
multiplelanguage PDF files do not
print 251
paper curl 270
paper frequently jams 265
print job takes longer than
expected 253
tray linking does not work 253
unexpected page breaks
occur 254
printer
configurations 12
minimum clearances 10
models 12
moving 225, 226
selecting a location 10
shipping 226
printer control panel 14
adjusting brightness 46
factory defaults, restoring 228
printer fax EXT port 36
printer fax LINE port 36
printer hard disk
disposing of 201
encrypting 204
printer hard disk encryption 204
printer information
where to find 9
printer IP address
finding 21
printer messages
290.30 Scanner Static Jam - Paper
Stop 244
290–294 ADF scanning jams 250
30.xx [Color] cartridge
missing 245
30.xx Missing [color] cartridge
and/or [color] imaging kit 245
31.xx Defective [color]
cartridge 245
31.xx Defective imaging kit 245
32.xx Replace unsupported [color]
cartridge 245
34 Incorrect paper size, open
[src] 246
35 Insufficient memory to support
Resource Save feature 246
37 Insufficient memory to collate
job 246
37 Insufficient memory, some held
jobs will not be restored 246
38 Memory full 246
39 Complex page, some data may
not have printed 246
51 Defective flash detected 247
52 Not enough free space in flash
memory for resources 247
53 Unformatted flash
detected 247
54 Network [x] software error 247
54 Standard network software
error 247
56 Standard USB port
disabled 247
57 Configuration change, some
held jobs were not restored 248
58 Too many flash options
installed 248
58 Too many trays attached 248
59 Incompatible tray [x] 248
61 Remove defective disk 248
62 Disk full 249
63 Unformatted disk 249
80 Routine maintenance 249
82 Replace waste toner
bottle 208
82.xx Replace waste toner
bottle 249
82.xx Waste toner bottle
missing 249
82.xx Waste toner bottle nearly
full 249
840.01 Scanner disabled by
admin 250
840.02 Scanner disabled. Contact
system administrator if problem
persists. 250
88.xx [Color] cartridge critically
low 217, 249
88.xx [color] cartridge low 250
88.xx [color] cartridge nearly
low 250
Adjusting color 239
Change [paper source] to [custom
string] 240
Change [paper source] to [custom
string] load [orientation] 240
Change [paper source] to [custom
type name] 239
Change [paper source] to [custom
type name] load
[orientation] 239
Change [paper source] to [paper
size] 240
Change [paper source] to [paper
size] [paper type] 240
Change [paper source] to [paper
size] [paper type] load
[orientation] 241
Change [paper source] to [paper
size] load [orientation] 240
Close front door 241
Error reading USB hub. Remove
hub. 241
Fax Station Name not set up.
Contact system
administrator. 241
Fax Station Number not set up.
Contact system
administrator. 241
If restarting job, replace originals
that have not begun to exit the
scanner 241
Insert Tray [x] 242
Index 301