Filter
Top Products
116
21
Conserving supplies
Toner Saver
To get the most from your toner supply, set Toner Saver On. Toner Saver reduces all color planes to
80% saturation. This helps lower the cost of printing without greatly effecting print quality. Toner Saver
can be used when color correction has been set to: Auto, 2-Color Draft, or Black and White.
2-Color Draft
When you select 2-Color Draft, the printer only uses the black and cyan colors to print your document.
This reduces the color toner applied to each page when you are printing multicolor drafts. This setting
significantly cuts the cost of printing color drafts and increases print speed.
Black and White
If you’re printing drafts of a color document, or you’re printing a color document that you want to
photocopy, set Color Correction to Black and White. Your document prints in shades of gray suitable for
reviewing or photocopying on a monochrome copier. This saves the toner in the magenta, cyan, and
yellow toner cartridges.
The following illustration shows the difference for each of the three color correction settings.