Filter
Top Products
48
5
Release the snap locks.
The position of the paper guides inform the printer the size of the transparency in the tray. If
the paper guides are in the wrong position, you may experience feeding problems or incorrect
formatting of transparencies.
6 Squeeze the snap locks on the end of the left side paper guide.
7 Slide the left side paper guide to align with the position of the transparency size you are
loading.
8 Release the snap locks.
9 Fan the stack to prevent the sheets from sticking together.
To prevent print quality problems, avoid getting fingerprints on the transparencies.
10 Place the transparencies with the notch to the left front of the tray as shown.
Note: Load transparencies only in tray 1. Do not exceed the maximum stack height
indicated on the label inside the tray.
Notch