Lightwave Communications 3200 Server User Manual


 
20
1 will refer to the netterm subsystem and
2 will refer to the network subsystem on the card
F1 - G1 switch cards (do not require updating)
H1 - O1 device cards
P1 - control card
LINESPERPAGE [n] - Display/set number of lines before pause
(n can be 0 to 99, 0 disables)
LISTCARDS - Show list of installed cards
LISTDEVICES - Show list of device names
LISTUSERS [user id|/ALL] - Display list of users
LOG [/ENABLE|DISABLE]
- Enable/disable system events
and set destination of event info
LOGOUT,LOGOFF - Logout
MODEM [/DEFAULT] - Display/set modem init string
/DEFAULT - set init string to default
MODEMTIMEOUT [t] - Display/set timeout for modem calls
(t can be 0 to 30 minutes, 0 disables)
NETWORK [/ALL|slot letter] - Set network parameters ('B' - 'E')
POWERSTATUS - Show status of power supplies
PROMPT [/CLEAR|/DEFAULT] - Set/clear system prompt for logged-out state.
or set prompt to factory default.
MODEM [/DEFAULT] - Display/set modem init string
/DEFAULT - set init string to default
MODEMTIMEOUT [t] - Display/set timeout for modem calls
(t can be 0 to 30 minutes, 0 disables)
NETWORK [/ALL|slot letter] - Set network parameters ('B' - 'E')
POWERSTATUS - Show status of power supplies
PROMPT [/CLEAR|/DEFAULT] - Set/clear system prompt for logged-out state.
or set prompt to factory default.
More
RESTORE - Restore internal database
(upload ASCII file)
TELNETTIMEOUT [t] - Display/set timeout for telnet sessions
(t can be 0 to 30 minutes, 0 disables)
TERMINALS - Display terminal settings
TERMINALS [/ALL|n] (n can be 1 to 17) - change settings
tftp [/B|/C|/D|/E] [get] host:file - Modified tftp command, used to
transfer new updates to this box
(/B use network card B, /C use card C, etc.)
tftpkill - kill active tftp session.
TIMEOUT [t] - Display/set timeout on sys admin login
(t can be 0 to 9 minutes, 0 disables)
VERSION [/ALL|slot letter] - Report software version information
(/ALL - return version for all cards)
sys admin>>
A listing of abbreviations for the administrator commands is also available when
connected to the administrator port. The ABBREVIATIONS command is only available
when logged in.
sys admin>ABBREVIATIONS
ConsoleServer3200 Sys Admin Command Abreviations List
ABBREVIATIONS - A
ADDUSER - ADDU
AU
BACKUP - (no abbreviation)
BREAK - (no abbreviation)
CHANGEPSWD - PASSWD
PSWD
CONNECTIONS - C
DELETEUSER - DELETEU
DEVICES - DEV
EDITUSER - EDITU
EU
FORCELOGOUT - (no abbreviation)
HELP - H, ?