Filter
Top Products
48
password and press <ENTER>. The ConsoleServer 3200 will then prompt the user for
the new password by displaying the prompt PLEASE ENTER NEW PASSWORD. The
user should enter the new password (which may be up to ten alphanumeric characters
and is case-sensitive) at this prompt and press <ENTER>. After entering the new
password, the user will be asked to verify the new password by the prompt PLEASE
VERIFY PASSWORD. The user should enter the new password again at this prompt
exactly as it was typed the first time and press <ENTER>. If both new password entries
match, the ConsoleServer 3200 will display New password accepted. on the screen
and return to the user prompt. If the new entries do not match, the message New and
verify password mismatch is displayed, the new password is rejected, and the old
password remains valid. The ConsoleServer 3200 will also reject a new password if the
incorrect password is entered when prompted for the old password, or if the new
password is the same as the old password.
7.6 Logging Out
A user may logout at any time that commands may be made to the ConsoleServer 3200
by typing LOGOUT, LOGOFF, or by selecting LOGOUT from a pull-down menu. When a
user is connected to a server and they logout, the connection to that server will be
broken and any other users that are listening to that session will lose their connection to
that server as well.
7.7 Checking Connections
CONNECTION INFO SCREEN
┌───────────────────────────────────────────────────────────────────────────┐
│ CONNECTION INFO │
├───────────────────────────────────────────────────────────────────────────┤
│01 - TEST 00 - User logged-in │
│02 - 00 - Channel present │
│03 - 00 - Channel present │
│04 - 00 - Channel present │
│05 - 00 - Channel present │
│06 - 00 - Channel present │
│07 - 00 - Channel present │
│08 - 00 - Channel present │
│09 - 00 - │
│10 - 00 - │
│11 - 00 - │
│12 - 00 - │
│13 - 00 - │
│14 - 00 - │
│15 - 00 - │
│16 - 00 - │
│17 - 00 - │
└───────────────────────────────────────────────────────────────────────────┘
Press Any Key To Continue ....
Only one user at a time may connect to a device on the ConsoleServer 3200, except
when using listen mode (see Section 7.9, Listening to a Server Session for more
details). Before attempting to select a device port, the user may desire to check if the
device port is free. The CONNECTIONS command allows the user to list the users that