Filter
Top Products
71
B.6 Ending the Flash Update
Slot (letter) Processor (number) Ex. C1 (exit to restart system): EXIT
Starting system
ConsoleServer 3200 Control Boot V1.26 (Jun 15 1999)
Copyright 1999 by Lightwave Communications, Inc. All rights reserved.
Starting system
Lightwave Communications, Inc. ConsoleServer 3200
Please wait...system initializing
Checking page 30
Once the flash update is completed for all selected cards, the system administrator
must type EXIT at the update prompt. Once <ENTER> is pressed, the ConsoleServer
3200 will restart and the standard start-up messages will be displayed. Once the
ConsoleServer 3200 has checked the memory pages (and reset those necessary), the
LCI3200>> prompt will be displayed and the system administrator may login. On the
first log in after the flash update, it recommended that the system administrator check
the software versions by using the VERSION /ALL command. Once the LCI3200>>
prompt appears on the control card, users may log back in and connect to servers as
before the update.