Filter
Top Products
MN102HF75K Flash EEPROM Version
Using the Onboard Serial Programming Mode
MN102H75K/F75K/85K/F85K LSI User Manual Panasonic Semiconductor Development Company
319
Panasonic
B.4 Using the Onboard Serial Programming
Mode
The serial programming mode is primarily used to program the flash ROM in
devices that are already installed on a PCB board. Panasonic provides the ded-
icated hardware and software for this mode. This section describes the microcon-
troller hardware, system configuration, software register map, and protocol for
this type of programming operation.
■
Hardware requirements:
♦ Onboard serial writer (YDC model AF200 (provisional))
♦ Add-on circuit for target board
♦ Flash programming connectors or pins for target board
■
Software requirements:
♦ Serial writer load program, installed in first kilobyte of MN102HF75K/
85K EEPROM
♦ Programming algorithm for operating the onboard serial writer
Figure B-4 Serial Writer Programming Configuration
Onboard serial writer
Serial communication
16-bit microcontroller
with flash EEPROM
Program
for TV
Television set