Filter
Top Products
Chapter 5 Cajun Campus CLI (Command Line Interface)
36 Cajun P333T User’s Guide
Show interface command
Use the show interface command to display information on network interfaces.
The syntax for this command is:
show interface
Example:
To display the interface:
Console>show interface
IP Addresses & Netmasks
-----------------------
Inband, vlan 1, IP address: 149.49.43.210, netmask: 255.255.255.0
Console>
Show port command
Use the show port command to display port status.
The syntax for this command is:
show port
[mod_num[/port_num]]
Example:
To display the status for port 4 on module 3:
Console>
show port
3/4
Console>
mod_num (Optional) Number of the module. If you do not specify a
number, the ports on all modules are shown.
port_num (Optional) Number of the port on the module. If you do not
specify a number, all the ports on the module are shown.
Port Status VLAN Level Neg Duplex Speed Type
---- ------- ----- ------ ---- ------- ------- ------
3/4 disabled 203 normal enable full 100Mb 100BaseT