Filter
Top Products
Chapter 5 Cajun Campus CLI (Command Line Interface)
Cajun P333T User’s Guide 37
Show Port Output Fields
Show module command
Show module command
Use the show module command to display module status and information. For each
module with an expansion sub-module installed, both module and sub-module
type and information are shown.
The syntax for this command is:
show module
[mod_num]
Example
Console> show module
Field Description
Port Module and port number
Status Status of the port (connected, faulty, disabled)
VLAN VLAN ID of the port
Level Priority level of the port (normal or high)
Neg The negotiation status of the port (enable, disable)
Duplex Duplex setting for the port (fdx, hdx)
Speed Speed setting for the port (10, 100).
Type Port type, for example, 10BaseT, 10BaseFL, 100BaseTX,
100BaseFX MM, 100BaseFX SM, 10/100BaseTX
mod_num (Optional) Number of the module. If you do not specify a
number, all modules are shown.
Mod Type Ports Serial-Num C/S Sw
------ ----------------- ---------- -------------- ----- -------
1 Cajun P333T 24 007486003 1.0 1.0.2
Mod Sub-Type Sub-Ports Sub-C/S
------ ----------------- ---------- -----
1 P330F2 2 1.0