Filter
Top Products
Chapter 5 Cajun Campus CLI (Command Line Interface)
Cajun P333T User’s Guide 39
Output Fields
Show cam command
Use the show cam command to display the CAM table for a specific port or
MAC_Addr. The syntax for this command is:
show cam
mod_num | port_num
show cam
mac
mac_addr
Console>
show cam mac
00-00-81-01-23-45
Total Matching CAM Entries = 2
Console>
Field Description
Port Module and port number.
Send-
Flowcontrol-
Admin
Send flow-control administration. Possible settings:
• on indicates the local port sends flow control to the far end;
• off indicates the local port does not send flow control to the far end;
Send-
Flowcontrol-
Oper
Send flow-control operation mode.
Receive-
Flowcntl-
Admin
Receive flow-control administration. Possible settings:
• on indicates the local port requires the far end to send flow control;
• off indicates the local port does not allow the far end to send flow
control;
Receive-
Flowcntl- Oper
Receive flow-control operation mode.
mod_num Number of the module.
port_num Number of the port.
mac_addr MAC address.
Dest MAC/Route Destination Ports
--------------- ----------------
00-00-81-01-23-45 2/9
00-00-81-01-23-45 2/10