Filter
Top Products
Chapter 5 Cajun Campus CLI (Command Line Interface)
40 Cajun P333T User’s Guide
Show trunk command
Use the show trunk command to display VLAN tagging information for the switch.
The syntax for this command is:
show trunk
[mod_num[/port_num]]
To display the VLAN tagging configuration for a specific port, specify the module
and port number of the port you want to display.
Example:
To display tagging information for the switch:
Console> (enable)
show trunk
Console> (enable)
To display tagging information for a specific port:
Console> (enable)
show trunk
4/5
Console> (enable)
mod_num (Optional) Number of the module.
port_num (Optional) Number of the port.
Port Mode Native VLAN VLANs allowed on trunk
------ ------ --------- --------------------------
4/9 dot1q 1 1-3071
4/10 off 1 1-3071
Port Mode Native VLAN VLANs allowed on trunk
------ ------ ----------- -------------------------
4/5 off 1 1-3071