Filter
Top Products
Chapter 5 Cajun Campus CLI (Command Line Interface)
Cajun P333T User’s Guide 57
Clear snmp trap command
Use the clear snmp trap command to clear an entry from the SNMP trap receiver
table.
The syntax for this command is:
clear snmp trap
<rcvr_addr | all>
Example:
Console> (enable) clear snmp trap 192.122.173.82
SNMP trap receiver deleted.
Console> (enable)
Clear VLAN command
Use the clear VLAN command to delete an existing VLAN and return relies that
were on the VLAN to the default VLAN # 1. When you clear a VLAN, all ports
assigned to that VLAN are assigned to the default VLAN # 1.
The syntax for this command is:
clear VLAN
[VLAN_num]
Example:
This example shows how to clear an existing VLAN (VLAN 4) from a management
domain:
Console> (enable) clear VLAN 4
This command will assign all ports on VLAN 4 to their default
in the entire management domain
Do you want to continue (y/n) [n]? y
VLAN 4 deletion successful
Console> (enable)
Clear cam command
Use the clear cam command to delete all entries from the CAM table.
The syntax for this command is:
clear cam
Example:
Console> (enable)
clear cam
CAM table entry cleared.
Console> (enable)
rcvr_addr IP address or IP alias of the trap receiver (the SNMP management
station) to clear.
all Keyword that specifies every entry in the SNMP trap receiver table
VLAN_num Number of the VLAN (range is 1to 3071).