Filter
Top Products
Chapter 5 Cajun Campus CLI (Command Line Interface)
58 Cajun P333T User’s Guide
Download command
Use the download command to copy a software image from a specified host to the
Flash memory of a designated module. You can only perform this command a
Privileged or Supervisor levels.
The syntax for this command is:
download
<host><file><mod_num>
Note:
You must reset the switch after performing the download.
Reset command
Use the reset command to restart the system or an individual module. If no module
number is defined or the module number of the Master is defined, the command
resets the entire system. If the module number is defined, the command resets or
sets to defaults the specified module (you must type the command in full).
The syntax for this command is:
reset
<system|mod_num
>
Example:
To reset the Master agent and force the entire system to reset:
Console> (enable) reset
This command will force a switch-over to the master module and
disconnect your telnet session.
Do you want to continue (y/n) [n]? y
Connection closed by foreign host.
host%
To set the Master agent and the system to their default values :
host Name or IP address of host
file Name of file to be downloaded
mod_num Number of the module to receive downloaded image
mod_num Number of the module to be restarted
system Reset the module to its default values.