Filter
Top Products
10
Chapter 3
Configuration
This Chapter provides details of the configuration process.
Overview
This chapter describes the procedure for:
•
Quick setup
•
Wireless access point configuration
•
Using the Status screens
PCs on your local LAN may also require configuration. For details, see Chapter 4 - PC Con-
figuration.
Other configuration may also be required, depending on which features and functions of the
Wireless Gateway you wish to use. Use the table below to locate detailed instructions for the
required functions.
To Do this: Refer to:
Configure PCs on your LAN. Chapter 4:
PC Configuration
Learn more about using DHCP on the internal LAN. Chapter 5:
DHCP
Configure and use the Serial (RS232) port, either for Internet access
or for Dial-in.
Chapter 6:
Serial Port
Configure various options:
•
Set a password for the Wireless Gateway, to protect the configu-
ration data.
•
Disable NAT (Network Address Translation),
•
Enable TFTP firmware upgrade feature.
•
Configure Remote Management (configure via the Internet)
•
Access the Printer Port setup screen.
Chapter 7:
Options
Configure the Wireless Gateway and other routers for a LAN which
already has 1 or more routers.
Chapter 8:
Routing
Use any of the following features:
•
Special Internet Applications
•
URL Filter
•
Virtual Servers
•
DMZ
Chapter 9:
Advanced Internet
Features
Limit Internet Access by individual workstations. Chapter 10:
Access Control
3