Filter
Top Products
Options
57
Printer Object Type
Sets the type of printer attached. The default setting is "Laser-
Writer". If the attached printer is not a LaserWriter (or
compatible), then you must:
•
Install the correct printer driver for the printer on each Apple
system requiring printer access
•
Check your Printer's user manual or manufacturer's Web site
and find the correct "Printer Object Type"
•
Enter the correct "Printer Object Type" on this screen.
If the "Printer Object Type" is incorrect, the printer will not be
visible from your Apple system.
Communication
Protocol
You must use the same setting as your Macintosh.
Logical Printers
No (L1, L2, L3)
There are 3 Logical Printers (Ports), named L1, L2, and L3.
These names can not be changed, and must be used when select-
ing the logical printer from your Unix system.
Pre-string (HEX)
Enter (in HEX) the series of printer commands to be sent to the
attached printer BEFORE each print job.
Post-string (HEX)
Enter (in HEX) the series of printer commands to be sent to the
attached printer AFTER each print job.
LF to CR/LF
If checked, Unix-style LF (line feed) characters at the end of each
line will be converted to CR/LF (carriage return/line feed) pairs,
as used in MSDOS and Windows.
Printer Status
Printer Status
This indicates the current status of the printer. Possible values are:
•
Idle
•
Printing
•
Off-line
•
Out of paper
"Refresh" Button
Click this to update the printer status information