Filter
Top Products
Serial Port
45
Status
Use this link to view the Serial Port status screen, described later in this
chapter.
Modem Properties Screen
This screen will be displayed when the "Modem Properties" button on the
Serial Port
screen is
clicked. Normally, it is not necessary to access this screen.
Figure 20: Modem Properties Screen
Data – Modem Properties Screen
Initial String
Initial String
This is a series of AT commands used to correctly configure your modem
or ISDN.
•
The Initial String can only be changed for the "Other" modem type.
•
See
Appendix C - AT Commands
for further details about the
required Initial String settings and standard AT commands.
Other Properties
Dial Type
Select Tone, Pulse or Other to match your system. For Other, you must
provide the
Dial String
.
Dial String
The AT command sent to your modem before dialing. For example,
"ATDT" tells your modem to use Tone Dialing.
Check your modem's documentation to find the correct AT commands.
Auto Answer
Commands
Enter the command strings which turn the "auto-answer" function in your
modem or ISDN TA ON and OFF.