Milan Technology MIL-W0311 Network Card User Manual


 
Serial Port
53
Start PPP Having established a physical connection, a PPP connection is now
being established.
PPP up fail The PPP connection could not be established.
PPP up successfully The PPP connection was established successfully.
Stop PPP The PPP connection was terminated. This will occur at the end of a
session, or an error condition.
Try to hang up Attempting to get the modem to hang up.
Time out There was no response from the modem
No carrier
No answer
The number dialed did not answer.
Idle timer expires "Disconnect after Idle Time" is Enabled, and the Time-out period
has been reached. The connection will now be terminated..
No dial tone The modem could not obtain a dial tone.
Set baudrate nnnn The serial line speed is being set to the speed set in the configura-
tion.