Filter
Top Products
PC Configuration
27
Figure 10: Network Configuration
2.
Select the TCP/IP protocol for your network card.
3.
Click on the Properties button. You should then see a screen like the following.
Figure 11: IP Address (Win 95)
Ensure your TCP/IP settings are correct, as follows:
Using DHCP
To use DHCP, select the radio button Obtain an IP Address automatically. This is the default
Windows settings.
Restart your PC to ensure it obtains an IP Address from the Wireless Gateway.
Using “Specify an IP Address”
•
If your PC is already configured, do NOT change the settings on the IP Address tab shown
in Figure 11 above.
•
On the Gateway tab, enter the Wireless Gateway's IP address in the New Gateway field and
click Add. Your LAN administrator can advise you of the IP Address they assigned to the
Wireless Gateway.