Filter
Top Products
Wireless Gateway User Guide
64
Managing Special Application Entries
Enable
1.
Select the entry from the drop-down list
2.
Click "Get Data"
3.
Check the Enable checkbox
4.
Click "Update"
Disable
As above, but uncheck the Enable checkbox.
Disable all
On the Advanced Internet screen, you can Enable or Disable the
Special Applications feature.
Delete
1.
Select the entry from the drop-down list
2.
Click "Delete"
Modify (Edit)
1.
Select the entry from the drop-down list
2.
Click "Get Data"
3.
Make any desired changes
4.
Click "Update"
Create a new entry
1.
Click "Clear Form"
2.
Enter the required data, as described below.
3.
Click "Add".
Data - Special Applications Screen
This data must be obtained from the service provider.
Select Entry
Name
This drop-down list shows all Special Applications which have been defined.
Get Data
Button
After selecting the desired entry, click this button to view its current settings
in the Details section of the screen.
You can then make any changes required. Click the "Update" button to save
your changes.
Details
Name
Enter a descriptive name to identify this application entry.
Enable
Use this to Enable or Disable support for this application, as required.
Outgoing
Protocol The protocol (TCP or UDP) used when you connect to the special applica-
tion service.
Port Range:
Start
The beginning of the range of port numbers used by the application server,
for data you send to it. If the application uses a single port number, enter it in
both the "Start" and "Finish" fields.
Port Range:
Finish
The end of the range of port numbers used by the application server, for data
you send.