Filter
Top Products
Operator's guide
the file, or the Linux info documentation for mgetty.
4.5 Data transfer
You may retrieve data from the DCM using a variety of standard seismic
protocols and formats. In addition, the DCM includes facilities for
communicating with Güralp Systems' own Scream! PC software. The options
on this set of pages allow you to configure the DCM to use these additional
methods.
Scream!
Scream! is a Microsoft Windows software package designed to configure and
retrieve data from Güralp digitizers. The options on this page allow you to
control how the DCM responds to requests from Scream!. Depending on your
requirements, the DCM can act either as an instrument in itself, or pass through
requests directly to connected equipment.
datatransfer.scream.server : Select on to allow Scream! to connect to the
module over a TCP/IP connection and receive data as if it were a connected
instrument. The connection can be established over an Ethernet, wireless, or
PPP link. If you do not want to transfer data directly to Scream! clients, select
off.
datatransfer.scream.server.allowserialaccess : The Scream! software allows
you to configure digitizers connected to it by serial links. Select yes if you want
to be able to use Scream! to configure digitizers attached to the DCM's serial
ports. The software is able to differentiate between several instruments
connected to the DCM, so enabling this option will allow you to configure all
attached digitizers from within Scream!.
December 2005 55