Filter
Top Products
1.2 Available Features
1
CF2002/CF3102 1-5
Before Making Copies Chapter 1
Finishing Settings
Stapling
Copies are stapled together before they are fed out.
Stapling is only available if the optional finisher (FN-8 or FN-116) is
installed.
Hole-punching
Holes are punched in copies before they are fed out.
Hole-punching is only available if the punch kit (PK-4) is installed in
the optional finisher (FN-8).
Zoom Settings
Auto Size
●
This setting automatically selects the most appropriate zoom ratio based on the
size of the document loaded and the specified paper size.
Full Size
●
This setting makes a copy that is the same size as the document (× 1.000).
Enlarged copies
●
Zoom settings for making enlarged copies from common standard document
sizes to standard paper sizes are available.
❍
Example 1: A Letter-size document can be copied onto the larger 11 × 17-size
paper.
❍
Example 2: A Legal-size document can be copied onto the larger 11 × 17-size
paper.
Reduced copies
●
Zoom settings for making reduced copies from common standard document siz-
es to standard paper sizes are available.
❍
Example 1: A Legal-size document can be copied onto the smaller Letter-size
paper.
❍
Example 2: An 11 × 17-size document can be copied onto the smaller Letter-
size paper.
Minimal
●
This setting slightly reduces the copy (×0.930).
❍
Selecting the “Minimal” setting ensures that any part of the original positioned
at the edge of the page will not be cut off in the copy.
Zoom copies
●
Any zoom ratio (between ×0.250 and ×4.000) can be specified.
❍
Touch and to specify the desired zoom ratio.