Filter
Top Products
1
1.5 Turning the Copier On and Off
1-16 CF2002/CF3102
Before Making Copies Chapter 1
1.5 Turning the Copier On and Off
To turn the copier on
➜
Set the power switch to “I”.
When the copier is turned on
1
The indicator on the [Start] key lights up in orange.
A screen indicating that the machine is starting up appears.
2
After a few seconds, the message “Now warming-up. Ready to scan.” appears
on the touch panel. When the indicator on the [Start] key lights up in green, a
job can be queued.
Queuing a job during warm-up
➜
An image can be scanned (a job can be queued) while the machine warms up
after it is turned on. If a job is queued, printing begins after the copier has fin-
ished warming up (after about 5 minutes at normal room temperature (68°F)).
Auto Panel Reset
●
The machine automatically resets all modes and functions to their default set-
tings if one minute has passed without the machine performing any operations.
●
If the magnetic card is removed from the optional data controller, the machine
assumes that the user has changed and automatically resets all modes and
functions to their default settings.
●
When the touch panel is reset, all settings that have not been stored, such as
the number of copies, return to their default settings (p. 1-20).