Filter
Top Products
5
5.2 Selecting a Finishing Setting
5-6 CF2002/CF3102
Specifying Copy Settings Chapter 5
●
If nonstandard-size paper is used, the paper width must be between 7-1/4 in.
and 11-3/4 in.
●
If nonstandard-size paper is used, the paper length must be between 7-1/4 in.
and 17 in.
●
The copier must not enter Interrupt mode.
To specify Finishing settings
1
Touch [Finishing].
A screen appears, showing the available Finishing settings.
2
Select the desired Finishing settings.
3
When “2-Hole Punch”
or “3-Hole Punch” is
selected, the [Change
Position] key appears.
4
Touch [Change Position]. The
Change Position screen appears.
5
Select the desired position for the punched holes, and then touch [Enter].