Minolta CF2002 Copier User Manual


 
1.5 Turning the Copier On and Off
1
CF2002/CF3102 1-19
Before Making Copies Chapter 1
To turn the copier off
1
Touch [Job Log] to check that no
jobs are queued.
2
If any copies or printouts remain in
the output tray, remove them.
3
Set the power switch to O.
Note
Do not turn off the copier while it is making copies or printing, otherwise a paper
misfeed may occur.
Do not turn off the copier while it is scanning or sending or receiving data, oth-
erwise all scanned data or transmission data will be deleted.
Do not turn off the copier while a queued job or stored data is waiting to be print-
ed, otherwise the jobs will be deleted.
When the copier is turned off
The following are cleared.
Settings that are not programmed, such as the number of copies
Jobs queued to be printed
Data scanned using the Scan to Memory function
Jobs saved with the Memory Recall function
Stored zoom ratios, programmed Copy mode settings, Utility mode settings and
UserBox settings are not erased.