Filter
Top Products
3.5 Loading Paper
3
CF2002/CF3102 3-21
Loading Paper Chapter 3
Loading Paper Into the Manual Bypass Tray
Paper can be fed manually through the manual bypass tray if you wish to copy onto
paper that is not loaded into a drawer, or if you wish to copy onto special paper.
1
Touch [Paper].
A screen that shows the specified paper size settings
appears.
2
Select the manual bypass tray.
3
The Paper Input Size
screen appears.
4
Select the setting for the size of paper that is loaded.
❍
For paper sizes in inch measurements, touch [Inch] to display a screen con-
taining inch paper size settings.
5
For a paper size other than the standard sizes listed on the screen, touch [Cus-
tom Size] to display a screen that allows you specify a size.
6
Touch , ,
and to select the
length of side X for the
paper that is loaded.
❍
Touch until
the cursor moves
below the fraction
that you wish to
change.
7
Touch , ,
and to select the
length of side Y for the paper that is loaded.
❍
Touch until the cursor moves below the fraction that you wish to
change.