Filter
Top Products
5
5.9 Checking the Settings
5-38 CF2002/CF3102
Specifying Copy Settings Chapter 5
4
Touch [Next] to display the third screen of settings.
5
To change a setting:
❍
Touch the setting that you wish to change. The corresponding screen ap-
pears.
❍
Change the setting as desired.
✎
Tip
The corresponding screens for the “Scan to Memory”, “Separate Scan”,
“Copy 1 Set” and “Neg. Pos. Reverse” functions and the “Glossy Mode” set-
ting are not displayed. Perform the usual procedure to display the corre-
sponding screens when changing these settings.
To change the settings
1
Press the [Mode Check] key.
2
Touch [Next] or [BackUp] until the screen containing the setting that you wish to
change appears.
3
Touch the setting that you wish to change. The corresponding screen appears.
4
Change the setting in the same way that it would normally be set.