Filter
Top Products
5
5.2 Selecting a Finishing Setting
5-4 CF2002/CF3102
Specifying Copy Settings Chapter 5
Non-Sorting (“Non-Sort” Setting)
The copies are fed out and stacked on top of each other as they are printed.
Crisscross Non-Sorting (“Non-Sort” Setting)
The copies are fed out in an alternating crisscross pattern.
However, crisscross non-sorting is only performed if the follow-
ing conditions are met.
●
The finisher is not installed.
●
Paper of the same size and type must be loaded with the
landscape orientation (crosswise) in one paper drawer and
with the portrait orientation (lengthwise) in another drawer.
●
The duplexing document feeder must be used.
●
The document must not contain pages of various sizes (i.e.,
“Mixed Orig Detection” function not used).
●
“Auto Paper” must be selected for the Paper setting.
●
Staple and hole-punch Finishing settings must not be selected.
●
The “Criss Cross Mode” function on the User’s Choice: 2 screen must be set to
“Yes”.
❍
For details on the “User’s Choice” functions, refer to “Specifying Default Set-
tings (“User’s Choice” Functions)” in the Administrator Operations volume.
Sorting (“Sort” Setting)
The copies are automatically divided into the specified number of sets with each set
containing a copy of each page.
Crisscross Sorting (“Sort” Setting)
Sets containing one copy of each page are fed out in an alter-
nating crisscross pattern.
However, crisscross sorting is only performed if the following
conditions are met.
●
The finisher is not installed.
●
Paper of the same size and type must be loaded with the
landscape orientation (crosswise) in one paper drawer and
with the portrait orientation (lengthwise) in another drawer.
●
The document must not contain pages of various sizes (i.e.,
“Mixed Orig Detection” function not used).
●
“Auto Paper” must be selected for the Paper setting.
●
Staple and hole-punch Finishing settings must not be selected.
1
1
1
1
1
3
2
4
Example: For 4 sets
1
1
1
1
1
1
1
1
Example: For 4 sets