6.1 Description of Jobs
6
CF2002/CF3102 6-3
Controlling Jobs Chapter 6
To change the status of a queued job
The status of jobs marked as “Waiting Print” can be changed.
Change the status according to the procedure described below.
1
Touch either [Job Log] or [Job Control] to display the queued jobs.
2
Select the job whose status you wish to change, and then touch [Change Mode].
The Job Mode Change screen appears.
3
The current status is displayed. Select the status that you wish to change.
4
The Job Mode Change screen for the status appears. Select the new status,
and then touch [Enter].
5
Check that the status of the job has been changed, and then touch [Enter].
To delete a queued job
Jobs marked as “Waiting Print” can be deleted.
1
Touch either [Job Log] or [Job Control] to display the queued jobs.
2
Select the job that you wish to delete, and then touch [Delete].
The selected job is deleted.
To cancel a job that is being printed
While a job is being printed, that job cannot be deleted from the Job Log or Job Con-
trol screens. Cancel a job that is being printed according to the procedure described
below.
1
While a job is being printed, press the [Stop] key on the operation panel.
Printing stops and the screen that allows you to select which job to cancel ap-
pears.
2
Check the details for the jobs that appear, and then, from the jobs that are being
printed or scanned, select the job that you wish to cancel. Then, touch [Delete].
To quit canceling the job being printed, press the [Start] key. Printing continues.
3
After touching [Delete], the message “Job has been done improperly. Check the
record.” appears. The job being printed is canceled.
4
Touch [Enter].