Filter
Top Products
54
8170 N/B MAINTENANCE
@ Set User Password
This item lets you set up user-level password. When this item is selected, the submenu will display as
shown below:
The procedure to set up the user password is the same as “Set Admin Password”.
NOTE:
1. You can not set up the user password unless the administrator password has been set up.
2. If both the administrator and user passwords are set up, only one password is required to boot the
system
3. To modify the SCU settings, you have to enter the administrator password. The user password only
allows you to browse the settings.
4. If the “Resume System” item is checked, the password is required only when the system is restored
from “Suspend-to-disk” status.
Enter old User Password: ..........
Enter new User Password: ..........
Verify new User Password: ..........
[X] Boot System
[ ] Enter SCU
Verify password when...
OK
OK
Cancel
Cancel
Set User password