Filter
Top Products
57
8170 N/B MAINTENANCE
@ Virus Alert
The “Virus Alert” item, when enabled, gives warning messages if the hard disk boot sector (partition
table) has been changed
When this item is selected, no submenu will display. A check mark (√) indicates Enabled; an underline
(_) indicates disabled
The default setting is Disabled.
The “HDD Timing” item sets the data transmit mode of the hard drive. The default setting is Ultra DMA-33
The “I/O 32 bit transfer” item, if enabled, allows you to have better data transfer rate. This effect is more
noticeable under DOS system. The default setting is Enabled
The “HDD Block transfer” item, if enabled, allows you to use hard disk with large capacity. The default
setting is Enabled
1.5.3.7 Components
COM Ports >
LPT Port
√
PS/2 Mouse Port
Legacy Usb >
√
Keyboard Numlock
Keyboard Repeat >
Components
@ COM Ports
The “COM Ports” item sets the settings of COM Port A and B. When this item is selected, the submenu
will display as shown below: