Filter
Top Products
70
8170 N/B MAINTENANCE
“Suspend” -system will enter suspend mode when LID is closed.
@ In ACPI Operating System:
The LID switch function is dependent on the setting of the Power Management in the operating system.
Before LID is closed LID is closed LID is opened
System is On System enters Suspend System still in Suspend
System in Suspend System still in Suspend System still in Suspend
“CRT/TV Display” -display will be switched to CRT/TV when LID is closed.
When the LID is closed, the LCD will be inactive and external display device will be active.
When the LID is opened, the display devices status (active/inactive) will be restored to the
state before the LID is closed.
Some special conditions are list below.
Before LID is closed LID is closed LID is opened
LCD (active)
CRT (present, inactive)
TV(present, inactive)
LCD (inactive)
CRT (active)
TV(inactive)
LCD (active)
CRT (inactive)
TV(inactive)
LCD (inactive)
CRT/TV is present
LCD (inactive)
CRT/TV is plugged out
LCD (active)
CRT/TV is not present