Filter
Top Products
93
8170 N/B MAINTENANCE
Disassembly
1. Carefully put the notebook upside down.
2. Remove four screws to access the SO-DIMM socket.
3. Pull the retaining clips outwards () and remove the SO-DIMM ( ). (Figure 2-13,14)
Figure 2-13 Remove the SO-DIMM Cover Figure 2-14 Remove the SO-DIMM
Reassembly
1. To install the SO-DIMM, match the SO-DIMM's notched part with the socket's projected part
and firmly insert the SO-DIMM into the socket at 20-degree angle. Then push down until the
retaining clips lock the SO-DIMM into position.
2. Replace three screws to lock the SO-DIMM socket cover.
2.2.6 SO-DIMM