Filter
Top Products
94
8170 N/B MAINTENANCE
Disassembly
1. Open the top cover. Remove the LED panel, keyboard, and heat sink . (See section 2.2.2 and 2.2.Disassembly.)
2. Pull out the antenna from the CPU compartment.
3. Remove the two hinge covers. (Figure 2-15)
Figure 2-15 Remove the LCD hinge covers Figure 2-16 Remove cables and Screws
to separate LCD
4. Disconnect the LCD cable from the system board, and remove four screws of the hinges. Now you can
separate the LCD assembly from the base unit. (Figure 2-16)
2.2.7 LCD Assembly