Filter
Top Products
2
SYSTEM CONFIGURATION
2.2 Applicable Systems
2.2.2 Applicable system for L series
2 - 5
1
OVERVIEW
2
SYSTEM
CONFIGURATION
3
SPECIFICATIONS
4
FUNCTIONS
5
PREPARATORY
PROCEDURES BEFORE
OPERATION
6
LINK DATA SEND/
RECEIVE PROCESSING
AND PROCESSING TIME
7
PROGRAMMING
8
TROUBLESHOOTING
2.2.2 Applicable system for L series
This section describes the applicable system for L series.
(1) Mountable modules and number of mountable modules
(a) Mountable modules
LCPU with a serial number (first five digits) of "16112" or later
LA1S extension base unit
(b) Number of mountable modules
MELSEC-L LA1S Extension Base Unit User’s Manual
POINT
• Depending on the combination with other modules or the number of
mounted modules, power supply capacity may be insufficient. Pay
attention to the power supply capacity before mounting modules, and if
the power supply capacity is insufficient, change the combination of the
modules.
• Mount a module within the number of I/O points for the CPU module. If
the number of slots is within the available range, the module can be
mounted on any slot.
(2) Supported software package
For the supported version of software package, refer to the following:
MELSEC-L LA1S Extension Base Module User’s Manual