Filter
Top Products
3
SPECIFICATIONS
3.2 Cable Specifications
3.2.2 Coaxial cable
3 - 8
1
OVERVIEW
2
SYSTEM
CONFIGURATION
3
SPECIFICATIONS
4
FUNCTIONS
5
PREPARATORY
PROCEDURES BEFORE
OPERATION
6
LINK DATA SEND/
RECEIVE PROCESSING
AND PROCESSING TIME
7
PROGRAMMING
8
TROUBLESHOOTING
4) Solder a contact to the internal conductor.
5) Insert a contact assembly in 4) to a plug shell and screw a nut into the plug
shell.
POINT
(1) When soldering an internal conductor and a contact, pay attention to the
following points.
• Do not swell up the soldered part.
• Properly solder a contact and an insulator of the cable without making
space between them or soldering them too tight.
• Perform soldering immediately so as not to modify the insulator.
(2) Before removing/mounting the coaxial cable connector, be sure to touch a
grounded metal object to discharge the static electricity from the human body.
Not doing so may cause failure of the module.
Soldered