Filter
Top Products
3 - 7
3.2 Cable Specifications
3.2.2 Coaxial cable
3
SPECIFICATIONS
(2) Connection of connector for coaxial cable
The following shows how to connect a BCN connector (connector plug for coaxial
cable) and a cable.
(a) Components of BNC connector and coaxial cable
(b) How to connect BNC connector and coaxial cable
1) Remove external sheath of a coaxial cable as shown below.
Be careful not to damage an external conductor.
2) Put a nut, washer, gasket, and clamp through the coaxial cable and unravel
the external conductor.
3) Cut the external conductor, insulator, and internal conductor in the following
dimensions.
As for the external conductor, cut it in the same dimensions as taper part of the
clamp, and smooth it down to the clamp.
Figure 3.3 Components of BNC connector and coaxial cable
Nut Washer Gasket
Clamp Contact
Plug shell
Components of BCN connector
External sheath
External conductor
Insulator
Internal conducto
r
Components of coaxial cable
A
Measures for removing external sheath
Cable A
3C-2V 15mm
5C-2V 10mm
Clamp
Gasket
Washer
Nut
Internal conductor
Insulator
Clamp and external conductor
B
C
Cable B C
3C-2V 3mm 6mm
5C-2V 5mm 7mm