Mitsubishi Electronics HC7900DW Projector User Manual


  Open as PDF
of 55
 
EN-31
IMAGE menu (continued)
ITEM SETTING FUNCTION
ADVANCED MENU
OK
The ADVANCED MENU is displayed for the following settings.
SCREEN SIZE
2 options Select according to the screen size.
VERTICAL LOCATION
±26 Use to adjust the position (height) of the projected image.
CW SPEED
4x / 6x
Select the color wheel speed. 6x is effective only when a 1080p 24
signal is input.
FRAME RATE CONVERSION
OFF A 96Hz driver provides four times in the input of 24P, realizing a speed
of film. This mode is suitable for playing games as this mode does not
cause the image delay due to conversion.
TRUE FILM Use to produce the sharp images, leaving frame-by-frame feeling
unique to films.
TRUE VIDEO Use to reduce blurring of the moving images by interpolating the
video images.
F.R.C. LEVEL
1 - 5 Use to adjust the effect level of the motion interpolation for the frame
rate conversion.
BrilliantColor™ ON / OFF
Use to select whether or not to enable the BrilliantColor™.
NOISE REDUCTION ON / OFF Reduces noise of projected images when the input signal is noisy.
CTI
0 - 5 Use to correct smeared color boundaries.
HDMI INPUT
AUTO The proper setting is automatically selected for HDMI input signal.
ENHANCED Select this when solid black appears with AUTO selected for HDMI
input. (See page 16.)
NORMAL Select this when grayish black appears with AUTO selected for HDMI
input. (See page 16.)
SUPERWHITE Select this when solid white appears with AUTO selected for HDMI
input. (See page 16.)
SETUP AUTO
Select AUTO for normal use. When LANGUAGE is not set to
and 480i, 480p or TV60 signal is input, the SETUP changes
to7.5%automatically.
OFF Select to make black lighter.
3.75%/7.5% Select to make black intense.
• When7.5%ischosen,thebrightnessisdecreasedbytheset-
up cancel function for the U.S. Choose OFF when the image is
dark.
COLOR MANAGEMENT
ON
/ OFF Select ON
to change to any desired color by adjusting each of
GAIN, SATURATION and HUE of six different colors. (See page 39.)
COLOR SPACE
WIDE The color space becomes wider than that of NORMAL and colors
appear natural.
NORMAL The color space gets close to that of sRGB.
PICTURE MENU RESET
OK
Pressing the ENTER button resets the picture quality settings of the
selected picture mode to the factory defaults.
• WhenFRAMERATECONVERSIONissettootherthanOFF,theimagemayickerataninstantwhenthemenuis
displayed.
• While a 3D image is displayed, you cannot set SCREEN SIZE, CW SPEED, FRAME RATE CONVERSION, and
F.R.C. LEVEL.
• Whilea2Dimage is displayed except for 24P, you cannot set CW SPEED.
Menu operation (continued)
 previous next