Filter
Top Products
EN-8
Remote control
1 STANDBY ( ) button
2 ON ( I ) button
3 COMPUTER/COMPONENT button
4 HDMI 1/2 button
5 PICTURE MODE button
6 F.R.C. button
7 AV MEMORY buttons
8 p, q, t, u buttons
9 MENU button
10 CONTRAST button
11 BRIGHTNESS button
12 GAMMA button
13 2D-3D button (See page 26.)
14 3D MODE button (See page 25.)
15 3D SYNC PAUSE button (See page 26.)
16 COLOR MANAGEMENT button
17 ENTER button
18 IRIS button
19 ASPECT button
20 COLOR TEMP. button
21 SHARPNESS button
22 COLOR button
23 AUTO POSITION button
24 ANAMO button
Preparing your projector (continued)
19
20
21
22
23
24
17
14
18
16
15
1
2
3
4
5
6
7
8
9
10
11
12
13
Important:
• Whenyoupressanybuttonontheremotecontrol,thebuttonsontheremotecontrolarelit.Waitapprox.6
seconds after releasing the button to turn them off.
Picture quality selection buttons
Using the following picture quality selection buttons, you can easily select the preset quality setting. Every time you
press the button, the setting switches. Alternatively, you can select the picture quality setting using the IMAGE menu.
(See page 30.) Items in the menus are shown in parentheses below.
PICTURE MODE (PICTURE MODE)
... Switches the picture mode.
IRIS (IRIS) ......................................... Switches the IRIS mode.
Picture quality adjusting buttons
When you press any of the following picture quality adjusting buttons, the screen for adjusting the picture quality
appears. Adjust the picture quality by pressing the t and u buttons. The picture quality adjustment can be made
alternatively in the IMAGE menu. (See page 30.) Items in the menus are shown in parentheses below.
CONTRAST (CONTRAST) ................ Adjusts the contrast of the projected image.
GAMMA (GAMMA MODE) ................ Selects one of the preset gamma mode. Adjustment of USER mode is also
available. (See page 39.)
BRIGHTNESS (BRIGHTNESS) ......... Adjusts the brightness of the projected image.
COLOR TEMP. (COLOR TEMP.) ....... Selects one of the preset color temperatures. Adjustment of USER mode is also
available. (See page 37.)
COLOR (COLOR) .............................. Adjusts the color thickness of the projected image.
SHARPNESS (SHARPNESS) ............ Adjusts the sharpness of the projected image.
F.R.C. (FRAME RATE CONVERSION /
... For 2D image display:
F.R.C. LEVEL / 3D F.R.C. LEVEL)
Selects the setting of FRAME RATE CONVERSION. By pressing the ENTER
button with TRUE VIDEO or TRUE FILM selected and then pressing the t or u
button, you can adjust the effect level of the motion interpolation by the frame
rate conversion (F.R.C. LEVEL). (See page 31.)
For 3D image display (only when 1080p24 frame packing signal is input):
Adjusts the effect level of the motion interpolation by the frame rate conversion
to 3D images (3D F.R.C. LEVEL).